E-Tech ET8 Manual de instalación descargar pdf (Pagina 4)

E-TECH ET8 (V4) CONTROL PANEL – INSTALLER MANUAL

The E-TECH ET8 is a wholly Australian Designed and Manufactured product

from E-Tech Security Products, Australia's largest manufacturer of quality

electronic security products. E-Tech Security Products Pty Ltd is a Quality

Accredited Company to ISO 9001.

This version of the ET8 introduces a number of new features including Radio

PIR Supervision, E-Tech LCD Keypad and numerous other innovations.

INTRODUCTION

FEATURES

• 8 Fully programmable zones

• Any combination of hardwire or

radio zones

• Full radio supervision

• Contact ID Dialler Format

• Ultra-Modern and Impact

resistant Housing

• E-Tech Audible Dialler Format

• "Follow Me" Audible Dialler

Option

• Separate 24 Hour Tamper input

• Single or Double Trigger Zones

• Remote LED or LCD Keypads

(Max 3)

• Fully programmable via the

system Keypad – Eliminates the

need for expensive programmers

or Proms.

• Inbuilt Vibration Sensor Analyser

• All programming data is perma-

nently stored in a non-volatile

EEprom memory

• Windows based Up\Down load

Software allows remote program-

ming and event status

• True Dynamic Battery Test every

time the Panel is armed /

disarmed and every hour

• Area Partitionable (2 Areas). Any

Zone can be programmed to any

area, as well as common areas

• Comes complete with an AC plug

pack and supports a 12V 7Ah

battery to maintain systems

security under all power supply

conditions

• Monitor Mode (Home Mode)

• Outputs are separately fused with

Automatic Reset Fuses

• Day Mode and Door Chime

feature.

• 30 Event Memory

• Supports 8 Radio Devices (Radio

PIRs, Radio Reeds etc)

• Supports 14 Radio Keys

• All inputs and outputs are heavily

protected against lightning and

high voltage supply transients.

An earth terminal is provided for

extra protection

• 15 User Codes

• ‘Arm only’ codes can be pro-

grammed

• Programmable Inputs to activate

selectable Outputs

• Designed utilising the latest SMD

Technology

• Forced Arming Feature

• Simple to Program and Use.

ET8 Version 4 ENHANCEMENTS OVER Versions 3.x

RADIO

• Radio supervision. Radio supervision can be used with E-TECH radio detectors that

transmit periodic supervision signals.

• Options added to either Toggle or Pulse Aux1 with the Radio Panic key.

• Option to have quieter siren chirps when arming/disarming with key switch or radio keys.

ARMING

• Arm only codes. Keypad codes can now be made to ARM ONLY - this does not apply to

Radio key codes.

• Option for siren warning burst when arming with radio key and a zone is unsealed.

• Warning beeps timing extended by changing to Entry Delay 2 timer.

• Monitor mode outputs are now selectable for both the 2 second monitor mode and full

monitor mode.

• The outputs for Area 1 and Area 2 can now be made to pulse on for 2 seconds. This

makes them useful as Smoke Detector Reset outputs by adding an external relay.

DIALLER

• Aux 2 output option for telephone line fail.

• Dialler sends a CANCEL report if there has been an alarm in full monitor mode.

• Dialler Listen-In has been added via the Siren output.

• The Miscellaneous Alarm reporting options have been increased to include reports such

as Mains Fail, Battery Fail, radio tamper reports and others now selectable).

• Audible Format is now more flexible in alarm reports. Mains and Battery fail reports can

now be sent when using the Audible format if required.

• Closing reports can be delayed until end of exit time.

• Manual and Auto Exclude reports can be disabled.

UP/DOWNLOAD

• CallBack in Normal Mode and User Program mode is now optional to allow up/download

without having a fixed callback telephone number.

• The ET8 Up/Download Software is completely new and is compatible with Windows 9x.

The user interface and presentation is also completely different.

HARDWARE

• An option to select 3k3 EOL resistors for Zones. Default is 2k2.

• A Tamper lead assembly has been provided to connect the internal tamper switch to the

Tamp header.

MISCELLANEOUS

• Only include mains fail in alarm memory when the previous event is not mains fail.

• Fire Siren sound can be selected for 24hr zones. Handy for Smoke Detectors.

• Separate Icons added to keypad to distinguish 0 & 9 on LCD keypad.

• Day mode does not latch zone alarms. The warnings are either for 2secs or while the Day

zone is unsealed.

• Zone Exclude with User Code Entry only accepts zones (1-8) that are in the AREAS that

the User Code can arm.

• In User Program Mode a Siren Test can be started by entering 77777777E (8 sevens) and

Dialler Test Report can be initiated by entering 66666666 ( 8 sixes).

• An option added which gives quiet siren chirps in Monitor mode, instead of the full

volume siren sound.

1 2 3 4 5 6 7 8 9 ... 63 64

Comentarios a estos manuales

Sin comentarios

E-Tech ET8 Manual de instalación Pagina 4

Comentarios a estos manuales

Relacionado con productos y manuales para Los Sistemas De Control De Acceso De Seguridad E-Tech ET8